- Model: H9 Flow
- Motherboard Support: Mini-ITX, Micro-ATX, ATX
- Enclosure Type: Mid-Tower
- 4 x 120mm Fans Included
- Steel Frame & Tempered Glass Window
- Stock: In Stock
- Brand: NZXT
- Model: H9 Flow
| Additional Feature | |
| PSU | Not Included |
| Case Type | |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX |
| Tempered Glass Panel | Yes |
| Type | Mid-Tower |
| Clearance Space | |
| Maximum CPU Cooler Height | Up to 165mm |
| Maximum Graphics Card Length | Up to 435mm |
| Maximum PSU Length | 200mm |
| External Features | |
| Color(s) | Black |
| Dimensions | Height: 495mm (With Feet) Width: 290mm Depth: 446mm |
| Drive Bays | 2.5": 4+2 3.5": 2 |
| Expansion Slots | Standard: 7 |
| Fan Support | Side: 3 x 120mm Top: 3 x 120mm / 2 x 140mm Bottom: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm Filters: All Air Intakes |
| Front Ports | 2 x USB 3.2 Gen 1 Type-A: 1 x USB 3.2 Gen 2 Type-C 1 x Headset Audio Jack |
| Material | SGCC Steel, Ultra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only) |
| Pre- Installed Fans | Front: 1 x 120 mm Side: 3 x 120 mm |
| Radiator Support | Side: Up to 360mm with Push/Pull Top: Up to 360mm Bottom: Up to 360mm Rear: Up to 120mm |
| Weight | 12.1 kg |
| Warranty Information | |
| Warranty | No Warranty |
NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing
The NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing will let you start your next build off correctly while embracing optimal airflow. The H9 Flow, which is intended for both novice and experienced builders, simplifies component installation and gives you room for a variety of gaming-focused components and strong cooling capabilities. Each of the steel and tempered glass panels can be removed for complete 360° access. You get enough room to install Mini-ITX, Micro-ATX, and ATX motherboards comfortably with 6.5" of clearance for CPU coolers. Seven full-sized expansion slots are available for powerful graphics cards measuring up to 17.1" long while still promoting airflow around the rest of your components. Four 120mm fans are pre-installed in the H9 Flow, promoting quiet operation with low noise. You get two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and a single 3.5mm combo audio jack, each allowing you to connect a range of peripherals from controllers to headsets.
Drive Bays
There is enough space inside the NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing to accommodate a variety of storage disks. There are two 3.5"/2.5" bays and four 2.5" drive bays altogether. The drive cage may be modified to accommodate bigger power sources or, if you'd like, removed entirely. If necessary, two 2.5" drive sleds can be transferred from the PSU shroud to the rear of the motherboard tray..
Fan & Radiator Support
Although there are four 120mm fans supplied, the H9 Flow's top bracket can accommodate a total of three 120mm or two 140mm fans. The H9 Flow can accommodate three 120mm fans on the sides and a single 120 or 140mm exhaust fan at the back. The design also allows you to install three 120mm or two 140mm fans at the bottom. Up to 360mm and up to 120mm liquid cooling radiators may be supported on the side, top, and bottom, respectively..
Easy to Build
The NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing Tool-less front and side access enables you to quickly access your components without the need for screwdrivers. Easily route cables on the inside of the H9 Flow with a 3.5" cable management space. You also get wide cable channels as well as hooks and straps to secure your cables down. The NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing comes with no warranty.
